276°
Posted 20 hours ago

Morphy Richards Hot Water Dispenser 131004 Redefine Black, 3 Litre

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Some dispensers are rather miserly, or make it awkward to fill anything other than a small cup or mug. These features are designed to reduce footprint and cost of boiling water, as if you need only one cup of water, or a whole pan for cooking meals such as pasta, the 131004 will boil only the water required for this job, leaving the rest for the next time you need it.

Using up to 70% less energy than a traditional kettle, the Meno Hot Water Dispenser lets you enjoy your favourite drinks in no time at all. The matt steel finish is practical to keep clean and there are matching bins and toilet brushes by Brabantia to complete the look. com is an Introducer Appointed Representative of Pay4Later Limited, trading as Deko, which is authorised and regulated by the Financial Conduct Authority (FRN 728646). Complete with precise temperature and volume control – it’s ready faster, uses less energy and doesn’t waste a drop of water. Great in a hard water area but as pp said, it would be better if it could dispense a larger volume of water as it didn't fill my larger cups.But found the joint concerned, you were spot on, attached the by pass wires and the machine has been working fine for over 2 weeks. Its compact design, attractive appearance, and reliable performance make it a great addition to any home, office, or small business. There's a lot more room to see what's going on inside with the water routing, and now I can see that the inflexible pipe join between the heating tank and the dispensing valve is actually just pressure-fit, and will loosen with a bit of shimmying. A handy tip here is to attach one multimeter crocodile clip to the pin on the other side of the board; then you only need to mess around with one of the probes to check for continuity.

We would always recommend that you speak to us first before disposing of any product purchased from us that you're not satisfied with, as we're always happy to help. Pry them out, take out some more self-tapping screws (matching the other ones from the base), and we can see how that complicated join works.

Now that the wire is fixed to the board, it's easier to do the same thing with the other ends: get a tiny bit of solder on the twisted end, use that to pin it to the desired contact, then add more solder to sure it up. I boiled and dispensed 9 litres of water then tried the next cup ful, it tasted disgusting, just like TCP which seems a common complaint. Overall I love this water heater despite it's quirks, it's fast to boil, has a great display that tells you what's happening and it feels well built.

By the way, as I removed the board, I heard the sound nobody wants to hear when repairing something: a tiny piece of something falling out of somewhere unseen and bouncing around into a convoluted cavity.Setting how much fluid you’re going to actually get is done via the dial above that, while the LED screen keeps you updated on all the details. The Redefine Hot Water Dispenser in sleek black will look smart and modern in any kitchen and will help to simplify daily tasks with efficiency and style. However, you’ll need to replace these filters on occasion, which is something to think about in terms of ongoing running costs. Luckily, it was just the plastic buttons on the face of the appliance, which are held in place just by resting against the board: when I removed the board, one fell out. The button also comes into play as you keep on pressing that if you’re aiming to fill pans for cooking purposes.

The whole case is plastic and flexes a bit, so I was thinking I was going to have to attempt the whole repair with the case under flexing pressure to make enough room. You fill the top of the tank then the water gradually filters through to the bottom, if you want to stand around for several minutes you can then refill the upper tank again then as you use water more filters through and you can use about 2. It's fully broken already, and not made in a repairable way, so I ripped it apart to hunt for wires. While not all hot water machines are capable of producing genuinely boiling water the Morphy Richards does a pretty good job, with pretty much bang-on-the-nose 100 degree H2O on offer.Actually, I tried to reflow it too, but my soldering iron has a hard time melting the solder on that join. If the valve doesn't try to open, it could be a broken connection to the valve control, or the valve itself is broken.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment